Center for Information Technology Services

Home > CITS > Services > Comm Files > Secure.html

The UM Secure Wireless is designed to provide a secure network with encryption to protect your information on the network. At this time you must use a wireless network card that is capable of supporting a WPA-2 Encryption format. Please follow the steps below for the Intel PROSet Wireless Setup.

Step1
Begin by opening your wireless network connections using the Intel PROSet Icon.

Step2
Click Profiles to open another window.

Step3
Select Add...

Step4
Under General Settings
Profile Name: UMB Secure
WiFi Network Name (SSID): UMB Secure
Leave the operating mode set to Network (Infrastructure)
Hit Next >>

Step5
Use these settings:
Bullet Enterprise Security
Network Authentication: WPA2 - Enterprise
Data Encryption: AES-CCMP
Authentication Type: TTLS
Authentication Protocol: PAP
User Credentials: Prompt each time I Connect
Hit NEXT>>

Step6
Check Validate Server Certificate
Any Trusted CA
Hit OK

Step7
Select the UMB Secure SSID from the network list and hit Connect

Step8
Do not change the Roaming Identity and type in your User Name and Password. Make sure to leave Domain BLANK. Hit OK

Step9
The connection process may take up to 90 seconds to complete.

Step10
The window will show you are connected. Close this window and open Internet Explorer.

Step11
Login using your myUMB and Password and select Continue.

Step12
Select Launch Cisco NAC Windows Agent 4.7.2.xx

Step13
Follow the on-screen instructions to install the NAC Agent.

Step14
Select Finish to complete the installation.

Step15
You can use your myUMB Login and password and select Log-in.

Step16
Once your system meets the requirements you will recieve a window showing you have full network access. Select OK to close this window. If you do not recieve this message you need to make sure your system meets the requirements. The system will try to make the necessary repairs which may take up to 20 minutes depending on your system.

Step17
When you are finished, right click the NAC Agent icon and select logout to end your current session.